As long as you consider the health of a car engine, there are hundreds of things to care about. You have to keep a sharp eye for any kind of possible threats that can be troublesome.
But to be honest, one of the deadliest thing that might occur inside the engine is an oil leak. So, you better be careful enough to located and prevent it before it turns into a bigger problem.
In this definitive guide, we will be providing you a complete guide on how to steam clean engine to find out leaks in the engine.
Why Engine Leak Is Cautious for Car?
You can not just identify a car oil leak at random cases, right? You need to sense that there had been a possible oil leak into the engine section. So, you need to learn the symptoms of the engine oil leak, and they move forward to prevent the leak anyways.
So, here in this section, we will talk about how you can understand the symptoms of car engine leak. Here you go-
Dark Puddles in The Driveway
The first way to identify a possible car engine oil leak is to seek for a dark puddle underneath the car. When you are moved from the driveway, you can have a glimpse and check for it.
Smoke Generation From The Car Engine
Although, there can be multiple reasons why smoke is generated from the car engine. But one of the likely causes of this incident is oil leak in the engine.
Indications at The Oil Light of Dashboard
There is an oil light indicator that indicates the condition of the oil system of the car. If you can read it correctly, you might sense an oil leak from the amount of oil usage.
Smell of Burning Oil
We all can sense the smell of burning oil, right? If there is any potential oil leak in the engine area, there would be some burning smell. And this can be an indicator that you should not ignore.
Steps on How to Steam Clean Engine to Find Oil Leak
This very section is the core of today’s concern. To begin the process, have a look at the list of items you would need through the steps-
Items You Need
- Steam Cleaner.
- Plastic bags.
- Brush with nylon teeth.
- Car engine dressing(not compulsory).
Done with collecting all the essentials? Here are the steps-
At first place, we need to cover the entire electrical openings of the car engine. For that purpose, we will use plastic bags as insulators. To cover up every electrical joints and ports, you might need a handful of plastic bags. But don’t you negotiate with that by any mean.
This will protect the electric parts of the engine, which are vulnerable to moisture or water splits.
Take the car steam cleaner at this stage, and fill it up with water. Make sure that the reservoir of the machine is not completely full, as it might bring on some difficulties.
Once done, let the steam cleaner heat up the water. Based on the amount of water, the power of the cleaner itself, and the heating time might vary a bit. But usually, it should be done within 10-20 minutes.
Make sure that the machine is ready to work. And proceed to the next step-
Now, decide from which part of the engine you will start the cleaning process from. There is no definite rule for this, but it’s safe to start from a non-complicated part.
Over proper application of steam on the engine segment, you will watch the oil and grease buildups to come down melted. This is essential because the hidden oil leaks will come out to be exposed in this way.
Just with the steam flow, all of the oils and grease buildups won’t disappear. There are some critical and hard to reach parts of the engine, which will still contain some of them.
To get done with, you need to have the nylon brush. Make sure that the brush teeth are brittle and long enough. Otherwise, it can’t reach the critical parts of the engine.
By now, you should be able to watch the location and size of the oil leak. The rest of the process is about preventing or fixing the oil leak. And that’s a completely different process.
However, in case you are not yet able to find the leak, you should start from step 3 over again. Because most of the oil leaks are hidden under the oil and grease buildups.
In case you find any other kinds of dirt that are not made of oil and grease, you might go through some different cleaning process. But oil and grease are the majority of the buildups on the engine area. And this should be taken care of through these set of steps.
Now, you will need to clean and dry up the engine and take it to its initial workable condition. A clean rag should be sufficient because it’s not too abrasive. It won’t damage any internal or external parts of the engine and yet deliver a cleanup process.
Thanks for going through the whole post. We are almost certain that you would be able to find and locate and prevent whatever oil leak that is bothering your car engine. In case you don’t, we would request to conduct the same process in a more precise way.
However, it’s not always suggested that you deal with car engine oil leaks in this way. With a number of conscious activities, you can prevent the rate of such leak creation.
Be a bit more careful to the health of the engine, and run regular maintenance activities. Good luck!